This is a standard car painting booth which serves as a contamination control that helps to confine the application of a hazardous material to a safe environment. It controls air and fuel mixture so that a combustible combination cannot occur.
The work of painting and spraying can be done in a clean and safe environment as the booth prevents hazardous overspray or volatiles from escaping and causing fire to nearby operations.
| Brand | Green Booth |
|---|---|
| Model | GSB4700D |
| Type | Double panel enclosed down draft system |
| Dimensions | L 7080mm x W 4700mm x H 2540mm |
| Panel Material | G.I. Sheet 1.0mm thick |
| Structure Material | M.S. SHS 50 x 50 x 3.2mm thick |
| Air Supply Fan Model | Double intake centrifugal fan (18 x 18) |
| Air Supply Motor | 10 Hp |
| Fresh Air Supply Chamber | E.G. Sheet 1.2mm thick |
| Heater Method | Infra-Red heater 24sets |
| Heater Total Output | 31.2kw |
| Temperature Design | 50°C - 60°C |
| Temperature Control | Baking timer and temperature controller |
| Ceiling Filter Coverage | Full area of ceiling |
| Ceiling Filter Material | Polyester fiber (EU8) |
| Air Intake Filter Material | Polyester fiber (EU3) |
| Air Outlet Filter Material | Fiber glass (EU6) |
| Fluorescent Light | 24sets, Double Philips T5 cool daylight tube |
| Front And Rear Door Design | 2 leaf single main door and 1 service door c/w center lock and safety lock |
| Exhaust Chimney | Numbering, jet cap & sampling port |
| Exhaust Chimney Material | G.I. Spider duct 0.8mmt |
| Control System | Normal conventional push button |
| Body Panel Finishing | Epoxy powder coating |